HEMP Structure Builder Gel: SBG-02 BARE WITH ME

HEMP Structure Builder Gel “SBG” NUDE  is a file off  (if using Clear SBG ) / Soak off with acetone builder gel ideal in a gel polish bottle for creating strong overlays and as a strengthening barrier for natural nails.

• HEMP structure Gel requires Hemp Rubber Base to be applied first.
• This product must be removed with the E-file (if you are E-File trained) or filed off by hand.
• No chipping or lifting, which helps grow natural nails;
• Advised to be infilled;
• Multipurpose formula acts as a base, builder gel, gel glue for press on tip, no hear spikes AND top coat
• Self-levelling formula for effortlessly strong overlays
• Secures nail decorations and embellishments
• One bottle can achieve 25 to 60 sets, depending on nail and extensions length.

• LED and UV curable.
• Size(s) 18ml
• Non-shrink and non-yellowing;
• Up to 4 weeks long lasting formula;

HEMP medium viscosity Structure Builder Gel can be added as a strengthening layer before HEMP Gel Polish application, as a natural nail overlay, or to create short to medium length
extensions using Forms or Clear Tips.
HEMP Nude “SBG” range already includes base and primer and is soak-off.  HEMP STRUCTURED HARD Clear and STRUCTURE HARD SOFT PINK do require HEMP Rubber Base to be applied beforehand and need to be removed with the E-file (if you are E-File trained) or filed off by hand. Then soak off the base layer.

STEP #1: NAIL PREP

Sanities your own and your customer’s hands.
• Use a cuticle pusher to push back the cuticles before trimming away excess with nippers
• File nails into shape using a 100/100 grit File.
• Gently buff nails using a  100/100 grit Buffer to remove any shine.
• Dehydrate and cleanse the nail plate using 100% pure acetone or the best result is using HEMP pH BOND (better for environment or technician and customers health care)
No ‘prep-and-wipe’ or ‘scrub-fresh’ solutions.
STEP #2: FIRST LAYER

Apply an even coat of clear Rubber base (if using HARD SOFT PINK or HARD CLEAR gel ) or a
thin coat of your chosen nude to the natural nail.
• Cure for 60 seconds in STRONG LED light the way lamp or 99 seconds if using
low heat mode. We do not recommend the use of other lower watts lamps. If the customer
experiences a ‘heat spike’, remove the nails from the lamp. Lost seconds must
be regained using Low Heat Mode again.’ (this is for any customers which has very sensitive and thin nail beds) otherwise our HEMP Structure Build Gel is NO HEAT gel.
STEP #3: SECOND LAYER
• Apply a medium bead of SBG, spreading side to side and dragging
away from the cuticle area. Avoid thick build-up around the free edge and the cuticle are.
• Seal the free edge.
• Build and cure one nail at a time, turn the hand over to help create apex if necessary.
• Cure using the HEMP Light The Way Lamp on low heat mode (99 seconds), the
lamp has been specifically designed to cure HEMP products. We do not
recommend the use of other Low heat lamps.

STEP #4: THIRD LAYER

REPEAT STEP 3
STEP #5: REFINE

Wipe with Isopropyl Alcohol
• Refine the nail using a  File or eFile if needed
• Buff into shape using a Buffer, concentrating on reducing the product around the cuticle area and the free edge.
• Remove any dust with a duster brush.
STEP #6: TOP COAT
For a nude finish apply a layer of HEMP Extreme Shine Top Coat. No need to
wipe or cleanse after curing. All HEMP top coats are non-wipe.
• If nails are to be finished with HEMP Gel Colour, follow the HEMP Gel Colour
Application’ steps.

Ingredients
Acrylates Copolymer 

Acrylic Acid
Dipropylene Glycol Diacrylate
Bumetrizole
Ethyl Trimethylbenzoyl Phenylphosphinate